Again in September 2022, Amazon introduced that you may pair a few of its Echo good audio system with any Eero mesh Wi-Fi system (besides the 1st gen) to get additional wi-fi protection.
That’s a less expensive means of increasing an Eero community than shopping for additional items, particularly in case you already personal appropriate Echo units.
It’s taken a full yr to roll this functionality out past the US and Canada, however now these within the UK can take part on the enjoyable.
Which Echo audio system can work as Eero mesh extenders?
Any fourth- or fifth-generation Echo will work. Which means the next units:
All of them have “Eero Constructed-in” which implies they’ll use Eero’s TrueMesh software program to offer a Wi-Fi community as much as 1000 sq. ft (round 93 sq. metres).
That sounds fairly good, however there are three chief limitations to pay attention to:
- Eero Constructed-in makes use of 5GHz solely, which implies units that work on 2.4GHz and don’t have a 5GHz radio gained’t have the ability to hook up with an Echo, and that guidelines out plenty of good residence equipment.
- Eero Constructed-in provides a pace of as much as 100Mbps, which is way slower than the efficiency Eero methods supply.
- Solely 10 units can join to every Echo.
Nonetheless, in case you do have some 5GHz units that may in any other case have a weak sign, it’s effectively value organising Eero Constructed-in to increase your Wi-Fi community.
Easy methods to arrange Eero Constructed-In on an Echo good speaker
Replace your Eero
Dominik Tomaszewski / Foundry
We’re assuming you have already got an Eero mesh system. If not, you’ll have to set that up first – one thing we’re not going to cowl right here.
Verify to see if there are any updates on your Eero system. To do this, open the Eero app, faucet on Settings, then Software program model.
You’ll be instructed if there’s an replace, or if the whole lot is already updated.
Arrange your Echo
Dominik Tomaszewski / Foundry
For those who’ve purchased one particularly to increase your Eero community, arrange your Echo speaker. As soon as plugged in, it can announce that it’s prepared for setup.
For those who don’t have already got it in your telephone set up the Alexa and register together with your Amazon account. Convey your telephone close to the brand new Echo and it is best to see a pop up saying it’s prepared for setup.
Simply observe the directions, however be sure to choose your Eero Wi-Fi community when prompted because the Echo must be linked to it for Eero Constructed-in to work.
Verify you’re utilizing an Amazon account
Dominik Tomaszewski / Foundry
Amazon purchased Eero in 2019, so in case you’ve had your system for a number of years, you is likely to be signed in with an Eero account.
For Eero Constructed-in to work, that you must hyperlink your accounts within the Eero app. To do this, open the Eero app, faucet on Uncover within the menu on the backside, then on Amazon Related House. Alternatively you’ll be able to undergo Settings → Account Settings. Once more, observe the directions to hyperlink your Eero and Amazon account. Then you’ll be able to allow Eero Constructed-in.
For those who’re already signed into Eero with an Amazon account, Eero Constructed-in ought to be enabled already, as proven within the picture above.
See which units are working as extenders
Dominik Tomaszewski / Foundry
When Eero Constructed-in is enabled, appropriate Echo units shall be used robotically to increase your Eero mesh Wi-Fi community.
To see which units have been detected and are getting used, faucet Uncover → Eero Constructed-in.
You’ll be able to faucet on these to see their standing. In the event that they’re already inside robust Wi-Fi protection of your current Eero community you’ll see a message saying that Eero Constructed-in has been disabled.
That’s due to these limitations talked about firstly: the Eero community is the preferable selection for pace and flexibility. So in case you can, it is best to transfer your Echo additional away from the closest Eero gadget and test once more to see if Eero Constructed-in is enabled.
